MODEL 716






 Automotive Multimeters ; 716 Dual Display Professional DMM


  • CE-mark Certificated.
  • 4 4/5 digit, 50000 count(primary) and 9999 count(secondary) dual display with bar-graph. (Frequency range : 99999 counts)
  • Closed case calibration through the phototronic serial port.
  • Accurate RPM measurement for 2- and 4-stroke automotive engines with 1 to 12 Cylinders using the Inductive Pickup.
  • ms-Pulse Width function to test on-time of both PFI type and TBI type fuel injectors, idle air control motors, and electronic transmission controls.
  • Duty Cycle and direct DWELL reading for electronic fuel injection, feedback carburetors, and ignition systems.
  • 4 steps adjustable triggers on 1 to 12 Cylinders, either 2 or 4 Cycle for outboards, motorcycles and conventional engines.
  • Measure temperature of fan switch and catalitic converters up to 2,372 °F (or 1,300 °C).
  • O2 Sensor test for a quick diagnosis and simulation of the complete O2 Sensor.
  • Ground test to locate bad ground, voltage drops, intermittent connections, or any source of high resistance in an automotive electrical circuits and grounds.
  • Charging system test to diagnose the battery and the alternator.
  • Battery Drain test to measure the car's battery current when it is turned off.
  • Auto Hold, 50 ms highspeed MIN/MAX/AVG, and Relative mode.
  • 1 ms peak mode.
  • Memory store and recall (20 locations).
  • Backlit display.
  • Auto-power-off.
  • RS-232C phototronic serial port.
  • Overmolded case.

SPECIFICATIONS (at 23°C±5°C : < 80% RH)

Frequency, RPM, and Dwell
Function Range Resolution Accuracy
Frequency
(0.5 Hz to 1000 kHz)
99.999 Hz
999.99 Hz
9.9999 kHz
99.999 kHz
999.99 kHz
0.001 Hz
0.01 Hz
0.1 Hz
1 Hz
0.01 kHz
0.005 % + 3 d
RPM 4-stroke 120-20000 RPM 2 RPM
2-stroke 60-10000 RPM 2 RPM
DWELL 0.0 ° - 356.4 ° 0.1 ° 1.2 °/krpm + 2 d

ms-Pulse Width and Duty Cycle
Mode Range Accuracy
Multi-Point-Injection 0.50 ms - 250.00 ms
0.0 % - 100.0 %
0.05 ms + 1 d
0.04 %/krpm + 2 d
Single-Point-Injection 0.50 ms - 250.00 ms
0.0 % - 100.0 %
0.05 ms + 1 d
0.04 %/krpm/cyl + 2 d

Volts, Ohms, Amps, and Temperature
Basic Accuracy (% of reading + number of counts)
DC Voltage : 0.1 % + 2
AC Voltage
(@ 40 Hz - 400 Hz)
: 0.5 % + 10
Ohms : 0.1 % + 2
DC Current : 0.5 % + 10
AC Current
(@ 40 Hz - 400 Hz)
: 0.75 % + 10
Temperature : 1.0 °C



The 716 automotive multimeter is designed to provide troubleshooting solutions to the most complicated problems encountered with today's sophisticated automotive electronic systems.

 
 


User's Manual download


 

 

Please contact us for more information at;


FINE INSTRUMENTS CORP.
Tel : +82-32-837-5777 
Fax : +82-32-837-5776 
B11, A-DONG, SMART VALLEY , SONGDOMIRAE-RO 30,
YEONSU-GU, INCHEON, KOREA

E-mail :  fine@finest.co.kr


 

 


 

 

Copyright(c) 2009 FINE INSTRUMENTS CORP. All rights reserved.